laser cutting parameters MFSC-2000X-50um cutting data

Single module MFSC-2000X-50um cutting data

三、单模块 MFSC-2000X 切割数据  Single module MFSC-2000X-50um cutting data

3.1 创鑫单模块 MFSC-2000X QBH 输出纤芯 50 μm 切割数据（准直 100mm/聚焦 125mm）Single module MFSC-2000X QBH output fiber core 50μm cutting data (collimation 100mm/ focus 125mm)

备注：碳钢和不锈钢等空气、氮气切割时，效率和稳定性都会提升，承着厚度增加，也容易出现挂渣现象，上面数据参数在实际批量切割时，受机床、系统、切割头、气压、材料等因素影响，数据可能会有变动，表中红标参数为打样参数，在实际加工中受各类因素影响较大，仅适合小批量生产，不推荐大批量生产加工，建议使用更高功率激光器。紫铜需用高压氧气切割，空气或氮气易造成激光器损坏。

Remark: Carbon steel and stainless steel, such as air, nitrogen cutting, efficiency and stability will be improved, bearing the increase of thickness,  but also  prone to hanging slag  phenomenon, the above data parameters in actual bulk cutting, machine tool, system, cutting head, air pressure, materials and other factors, there may be changes, the data in the table red mark parameters for proofing, greatly influenced by various factors in the actual processing, It is only suitable for small batch production.  Mass production is not recommended.  Higher power lasers are recommended. Copper needs to be cut with high pressure oxygen, air or nitrogen are easy to cause damage to the laser.

3.2 单模块 MFSC-2000X 纤 芯 50 μ m 穿孔推荐 Single  module  MFSC-2000X fiber core 50μm perforation reference

3.2.1 创鑫 MFSC-2000X 20mm 碳钢氧气穿孔参数（仅供参考） MAX  MFSC-2000X 20mm carbon steel oxygen perforation parameters (for reference only)

3.2.2 创鑫 MFSC-2000X 8mm 不锈钢氮气穿孔参数（仅供参考） Nitrogen perforation parameters of MAX MFSC-2000X 8mm stainless steel (for reference only)

穿孔参数以当前功率下能够穿透的极限碳钢/不锈钢厚度为例，穿孔参数可调节范围大，依据实际效果可调节占空比和频率等参数，达到最佳效果；穿孔按顺序逐级排序，高位为第一级穿孔，以此类推。

The  perforation  parameters  are  taken  as  the  limit  carbon  steel/stainless  steel  thickness  that  can  be penetrated under the current power as an example. The perforation parameters can be adjusted in a wide range, and the duty cycle and frequency can be adjusted according to the actual effect to achieve the best effect. The piercings are sorted step by step, the high position is perforated for the first level, and so on.