You are here: Home » Blog » cutting parameters of a laser cutting machine-c030

cutting parameters of a laser cutting machine-c030

Views: 0 Author: Site Editor Publish Time: 2025-10-22 Origin: Site

Laser Model		RFL-3000(34u)		Cutting Head Optical Ratio		150Collimation 100 / Focal Length 150
Laser Model		RFL-3000(34u)		Cutting Head Optical Ratio		150Collimation 100 / Focal Length 150

Material	Thickness [mm]	Speed [m/min]	Power [W]	Gas	Air Pressure [bar]	Nozzle [mm]	Focal Position [mm]	Cutting Height [mm]
Carbon Steel	1	30-37	2600	N₂/Air	10	1.5S	0	1
Carbon Steel	2	18-22	2600	N₂/Air	10	2.0S	0	0.5
Carbon Steel	2	3.6-4	2100	O₂	1.6	1.0D	+3	0.8
	3	3-3.4	2100		0.6	1.0D	+4	0.8
	4	2.8-3	2400		0.6	1.0D	+4	0.8
	5	2.6-2.8	2600		0.6	1.2D	+4	0.8
	6	2-2.3	2600		0.6	1.2D	+4	0.8
	8	1.6-2	2600		0.6	1.2D	+4	0.8
	10	0.8-1.1	2600		0.6	1.2D	+4	0.8
	12	0.8-0.9	2400		0.6	3.0D	+4	0.8
	14	0.7-0.8	2400		0.6	3.0D	+4	0.8
	16	0.5-0.6	2400		0.6	3.5D	+4	0.8
	18	0.4-0.5	2400		0.6	4.0D	+4	0.8
Stainless Steel	1	30-37	2600	N₂	10	1.5S	0	0.8
	2	20-24			12	2.0S	0	0.5
	3	8-11			12	2.5S	-0.5	0.5
	4	4.5-5.5			14	2.5S	-1.5	0.5
	5	2.8-3.4			14	3.0S	-2.5	0.5
	6	1.8-2.5			14	3.0S	-3	0.5
	8	0.8-1			16	3.5S	-4.5	0.5
	10	0.4-0.5			16	4.0S	-6	0.5
Aluminum	1	28-30	2600	N₂	12	1.5S	0	0.8
	2	16-20			12	2.0S	0	0.5
	3	6-7			14	2.0S	-1	0.5
	4	4-5			14	2.5S	-2	0.5
	5	2.2-2.5			16	3.0S	-3	0.5
	6	1.2-1.5			16	3.0S	-3.5	0.5
	8	0.4-0.5			16	3.5S	-4	0.5
Brass	1	24-32	2600	N₂	12	1.5S	0	0.8
	2	12-16			12	2.0S	0	0.5
	3	4-5			14	2.5S	-1	0.5
	4	2.2-2.8			14	3.0S	-2	0.5
	5	1.5-2			14	3.0S	-2.5	0.5
	6	0.6-0.8			16	3.0S	-3	0.5

Note: The parameters marked in red in the table are prototype parameters. These parameters are greatly affected by various factors during actual processing, so they are only suitable for small-batch production and not recommended for large-batch production and processing. It is advisable to use a laser with higher power.

cutting parameters of a laser cutting machine-c030

WHAT WE CAN OFFER

WHAT WE DO

OUR TECHNOLOGY

SERVICE