International customers please email customer service team with any questions.
Language
Views: 0 Author: Site Editor Publish Time: 2025-10-22 Origin: Site
| Laser Model | RFL-3000(34u) | Cutting Head Optical Ratio | 150Collimation 100 / Focal Length 150 | |||||
| Material | Thickness [mm] | Speed [m/min] | Power [W] | Gas | Air Pressure [bar] | Nozzle [mm] | Focal Position [mm] | Cutting Height [mm] |
| Carbon Steel | 1 | 30-37 | 2600 | N₂/Air | 10 | 1.5S | 0 | 1 |
| 2 | 18-22 | 2600 | 10 | 2.0S | 0 | 0.5 | ||
| Carbon Steel | 2 | 3.6-4 | 2100 | O₂ | 1.6 | 1.0D | +3 | 0.8 |
| 3 | 3-3.4 | 2100 | 0.6 | 1.0D | +4 | 0.8 | ||
| 4 | 2.8-3 | 2400 | 0.6 | 1.0D | +4 | 0.8 | ||
| 5 | 2.6-2.8 | 2600 | 0.6 | 1.2D | +4 | 0.8 | ||
| 6 | 2-2.3 | 2600 | 0.6 | 1.2D | +4 | 0.8 | ||
| 8 | 1.6-2 | 2600 | 0.6 | 1.2D | +4 | 0.8 | ||
| 10 | 0.8-1.1 | 2600 | 0.6 | 1.2D | +4 | 0.8 | ||
| 12 | 0.8-0.9 | 2400 | 0.6 | 3.0D | +4 | 0.8 | ||
| 14 | 0.7-0.8 | 2400 | 0.6 | 3.0D | +4 | 0.8 | ||
| 16 | 0.5-0.6 | 2400 | 0.6 | 3.5D | +4 | 0.8 | ||
| 18 | 0.4-0.5 | 2400 | 0.6 | 4.0D | +4 | 0.8 | ||
| Stainless Steel | 1 | 30-37 | 2600 | N₂ | 10 | 1.5S | 0 | 0.8 |
| 2 | 20-24 | 12 | 2.0S | 0 | 0.5 | |||
| 3 | 8-11 | 12 | 2.5S | -0.5 | 0.5 | |||
| 4 | 4.5-5.5 | 14 | 2.5S | -1.5 | 0.5 | |||
| 5 | 2.8-3.4 | 14 | 3.0S | -2.5 | 0.5 | |||
| 6 | 1.8-2.5 | 14 | 3.0S | -3 | 0.5 | |||
| 8 | 0.8-1 | 16 | 3.5S | -4.5 | 0.5 | |||
| 10 | 0.4-0.5 | 16 | 4.0S | -6 | 0.5 | |||
| Aluminum | 1 | 28-30 | 2600 | N₂ | 12 | 1.5S | 0 | 0.8 |
| 2 | 16-20 | 12 | 2.0S | 0 | 0.5 | |||
| 3 | 6-7 | 14 | 2.0S | -1 | 0.5 | |||
| 4 | 4-5 | 14 | 2.5S | -2 | 0.5 | |||
| 5 | 2.2-2.5 | 16 | 3.0S | -3 | 0.5 | |||
| 6 | 1.2-1.5 | 16 | 3.0S | -3.5 | 0.5 | |||
| 8 | 0.4-0.5 | 16 | 3.5S | -4 | 0.5 | |||
| Brass | 1 | 24-32 | 2600 | N₂ | 12 | 1.5S | 0 | 0.8 |
| 2 | 12-16 | 12 | 2.0S | 0 | 0.5 | |||
| 3 | 4-5 | 14 | 2.5S | -1 | 0.5 | |||
| 4 | 2.2-2.8 | 14 | 3.0S | -2 | 0.5 | |||
| 5 | 1.5-2 | 14 | 3.0S | -2.5 | 0.5 | |||
| 6 | 0.6-0.8 | 16 | 3.0S | -3 | 0.5 | |||
Note: The parameters marked in red in the table are prototype parameters. These parameters are greatly affected by various factors during actual processing, so they are only suitable for small-batch production and not recommended for large-batch production and processing. It is advisable to use a laser with higher power.
Related Products
content is empty!
