You are here: Home » Blog » cutting parameters of a laser cutting machine-C060

cutting parameters of a laser cutting machine-C060

Views: 0 Author: Site Editor Publish Time: 2025-10-22 Origin: Site

Laser Model		RFL-3000(34u)		Cutting Head Optical Ratio		150Collimation 100 / Focal Length 150
Laser Model		RFL-3000(34u)		Cutting Head Optical Ratio		150Collimation 100 / Focal Length 150
Material	Thickness [mm]	Speed [m/min]	Power [W]	Gas	Air Pressure [bar]	Nozzle [mm]	Focal Position [mm]	Cutting Height [mm]
Carbon Steel	1	40-50	5000	N₂/Air	6	1.5S	0	1
	2	30-35			6	2.0S	-1	0.5
	3	20-25			6	2.0S	-1.5	0.5
	4	13-18			8	2.0S	-2	0.5
	5	8-10			8	3.0S	-2.5	0.5
	6	6-8			8	3.5S	-3	0.5
Carbon Steel	3	3.6-4.2	2400	O₂	0.6	1.2E	+3	0.8
	4	3.2-3.4	2400		0.6	1.2E	+3	0.8
	5	3-3.2	3000		0.6	1.2E	+3	0.8
	6	2.7-2.9	3000		0.6	1.2E	+3	0.8
	8	2.2-2.4	4500		0.6	1.2E	+5	0.8
	12	0.9-1	2400		0.6	3.0D	+4.5	0.8
	14	0.8-0.9	2400		0.6	3.5D	+5	0.8
	16	0.7-0.8	2400		0.6	4.0D	+5.5	0.8
	18	0.55-0.65	2400		0.6	4.0D	+5.5	0.8
	20	0.5-0.6	2400		0.6	4.0D	+5.5	0.8
	22	0.45-0.5	2400		0.6	4.5D	+5.5	0.8
Stainless Steel	1	40-50	5000	N₂	10	1.5S	0	0.8
	2	30-35			12	2.0S	-1	0.5
	3	20-25			12	2.5S	-1.5	0.5
	4	13-18			14	2.5S	-2	0.5
	5	8-10			14	3.0S	-2.5	0.5
	6	6-8			15	3.0S	-3	0.5
	8	3-4			15	3.0S	-4	0.5
	10	1.8-2.2			15	3.5B	-6	0.5
	12	1.2-1.5			16	3.5B	-7.5	0.5
	14	0.8-1.2			16	4.0B	-9	0.5
	16	0.4-0.5			18	4.0B	-14	0.5
	18	0.3-0.4			20	5.0B	-15	0.3	300	60
Aluminum Alloy	1	35-45	5000	N₂	12	1.5S	0	1
	2	28-32			12	2.0S	-1	0.5
	3	18-23			14	2.5S	-1.5	0.5
	4	12-16			14	2.5S	-2	0.5
	5	7-9			14	3.0S	-3	0.5
	6	4-6			16	3.0S	-3	0.5
	8	2.5-3			16	3.0S	-7	0.5
	10	1.5-1.8			18	3.5B	-8	0.5
	12	0.8-1			18	4.0B	-8	0.5
	14	0.6-0.7			18	4.0B	-9	0.3
	16	0.35-0.45			20	5.0B	-12	0.3
Brass	1	30-40	5000	N₂	12	1.5S	0	1
	2	26-30			12	2.0S	-1	0.5
	3	16-20			14	2.5S	-2	0.5
	4	10-14			14	3.0S	-3	0.5
	5	4.5-6			14	3.0S	-4	0.5
	6	3.5-4			16	3.0S	-5	0.5
	8	2-2.4			16	3.5B	-6	0.5
	10	1-1.3			16	3.5B	-8	0.5
Copper	1	20-25	5000	O₂	5	2.0S	-0.5	1
	2	12-14			5	2.0S	-1	0.5
	3	7-9			5	2.0S	-2	0.5
	4	4-5			6	2.0S	-2	0.5
	5	2.5-3.5			6	2.5S	-3	0.5
	6	1.5-2			8	2.5S	-3	0.5

Note: The parameters marked in red in the table are prototype parameters. These parameters are greatly affected by various factors during actual processing, so they are only suitable for small-batch production and not recommended for large-batch production and processing. It is advisable to use a laser with higher power.

cutting parameters of a laser cutting machine-C060

WHAT WE CAN OFFER

WHAT WE DO

OUR TECHNOLOGY

SERVICE