You are here: Home » Blog » cutting parameters of a laser cutting machine-80000(180u)

cutting parameters of a laser cutting machine-80000(180u)

Views: 0 Author: Site Editor Publish Time: 2025-10-22 Origin: Site

Laser Model		RFL-3000(34u)		Cutting Head Optical Ratio		150Collimation 100 / Focal Length 150
Laser Model		RFL-3000(34u)		Cutting Head Optical Ratio		150Collimation 100 / Focal Length 150
Material	Thickness [mm]	Speed [m/min]	Power [W]	Gas	Air Pressure [bar]	Nozzle [mm]	Focal Position [mm]	Cutting Height [mm]
Carbon Steel	20	8.5-10	40000~80000	N₂＆O₂	4	6.0B	-6	0.3
	25	7-8			4	6.0B	-9	0.3
	30	5.5-6.5			4	6.0B	-12	0.3
	35	4-5.5			3	6.0B	-17.5	0.3
	40	3.5-4			3	10.0B	-19	0.3
	45	2.5-3			3	10.0B	-27	0.3
Carbon Steel	16	1.6-1.8	12000	O₂ 正焦	0.5	1.4SP	+15	0.3
	18	1.6-1.7			0.55	1.4SP	+16	0.3
	20	1.5-1.6			0.6	1.6SP	+18	0.3
	25	1.2-1.4	20000		0.6	1.6SP	+18	0.3
	30	1.2-1.3			0.65	1.8SP	+21	0.3
	35	1.1-1.2			0.8	1.8SP	+21	0.3
	40	0.9-1.1	25000		0.9	1.8SP	+21	0.3
	45	0.8-1	25000		1.1	1.8SP	+21	0.3
	50	0.75-0.9	30000		0.85	2.3SP	+26	0.3
	60	0.7-0.8	50000		0.8	3.0S	+30	0.3
	70	0.6-0.8	56000		1.2	3.0S	+35	0.3
	80	0.6-0.7	64000		1	3.5S	+39	0.3
	100	0.5-0.6	80000		1	4.0S	+45	0.3
	160	0.15-0.25	80000		1.5	4.0S	+45	5
	200	0.15-0.2	80000		1.5	4.0S	+45	3
Carbon Steel	20	2.4-3	15000	O₂ 负焦	1.5	1.8SP	-14	1.5
	25	2.2-2.6	30000		1.3	2.0SP	-16	1.5
	30	2-2.4	30000		1.5	2.0SP	-17	1.5
	35	2-2.2	35000		1.8	2.0SP	-17	1.5
	40	1.6-2	35000		1.4	2.5SP	-19	3
	45	1.4-1.8	40000		1	2.5SP	-22	3
	50	1.2-1.6	40000		1	3.0S	-28	2.5
	60	1.4-1.6	60000		1	3.0S	-30	3.5
	70	1.2-1.4	64000		1	3.0S	-30	3.5
	80	1-1.2	70000		1	3.0S	-33	4
	90	0.8-1	73000		1	3.5S	-35	4
	100	0.7-0.9	80000		1.2	3.5S	-40	4
	120	0.45-0.6	80000		1.3	3.5S	-45	4
	160	0.3-0.35	80000		1.3	4.0S	-52	4
	200	0.15-0.2	80000		1.4	4.0S	-60	4
Stainless Steel	20	10-11	60000~80000	Air	8	6.0B	-8	0.3
	25	8-9			3	8.0B	-11	0.3
	30	6-7			3	8.0B	-13	0.3
	35	4-5			3	8.0B	-18	0.3
	40	3.5-4			4	8.0B	-18	0.3
	50	2-3			4	10.0B	-28	0.3
	60	1.6-2			3	10.0B	-33	0.3
	70	1-1.5			3	10.0B	-39	0.3
	80	0.8-1			3	10.0B	-42	0.3
	90	0.7-0.8			3	10.0B	-40	0.3
	90(调制）	0.3-0.35			3	10.0B	-40	0.3	100~200	45~55
	100	0.5-0.7			3	10.0B	-50	0.3
	100(调制）	0.25-0.35			3	10.0B	-37	0.3	50~100	45~55
	120	0.35-0.45			3	10.0B	-45	0.3
	130	0.25-0.35			3	10.0B	-50	0.3
	140	0.18-0.25			3	10.0B	-57	0.3
	150	0.15-0.18			3	10.0B	-65	0.3

Note: The parameters marked in red in the table are prototype parameters. These parameters are greatly affected by various factors during actual processing, so they are only suitable for small-batch production and not recommended for large-batch production and processing. It is advisable to use a laser with higher power.

cutting parameters of a laser cutting machine-80000(180u)

WHAT WE CAN OFFER

WHAT WE DO

OUR TECHNOLOGY

SERVICE