laser cutting parameters MFMC-6000W-100um cutting data

Multi-module MFMC-6000W-100um cutting data

六、多模块 MFMC-6000W 切割数据 Multi-module MFMC-6000W-100um cutting data

6.1 创鑫 MFMC-6000W 一体化 QBH 输出纤芯 100 μm 切割数据 (准直 100mm/聚焦 150mm）MAX MFMC-6000W  integrated  QBH  output  core  100μm  cutting  data  (collimation   100mm/  focus 150mm)

备注：碳钢和不锈钢等空气、氮气切割时，效率和稳定性都会提升，承着厚度增加，也容易出现挂渣现象，上面数据参数在实际批量切割时，受机床、系统、切割头、气压、材料等因素影响，数据可能会有变动，表中红标参数为打样参数，在实际加工中受各类因素影响较大，仅适合小批量生产，不推荐大批量生产加工，建议使用更高功率激光器。紫铜需用高压氧气切割，空气或氮气易造成激光器损坏。

Remark: Carbon steel and stainless steel, such as air, nitrogen cutting, efficiency and stability will be improved, bearing the increase of thickness,  but also  prone to hanging slag  phenomenon, the above data parameters in actual bulk cutting, machine tool, system, cutting head, air pressure, materials and other factors, there may be changes, the data in the table red mark parameters for proofing, greatly influenced by various factors in the actual processing, It is only suitable for small batch production.  Mass production is not recommended.  Higher power lasers are recommended. Copper needs to be cut with high pressure oxygen, air or nitrogen are easy to cause damage to the laser.

6.2 多模块 MFMC-6000W 纤芯 100 μm 穿孔参考 Multi module MFMC-6000W 100 μm p eration reference

6.2.1 创鑫 MFMC-6000W 25mm 碳钢穿孔参数（仅供参考）MAX MFMC-6000W 25mm carbon steel perforation parameters (for reference only)

6.2.2 创鑫 MFMC-6000W 20mm 不锈钢氮气穿孔参数（仅供参考）

穿孔参数以当前功率下能够穿透的极限碳钢/不锈钢厚度为例，穿孔参数可调节范围大，依据实际效果可调节占空比和频率等参数，达到最佳效果；穿孔按顺序逐级排序，高位为第一级穿孔，以此类推。

The  perforation  parameters  are  taken  as  the  limit  carbon  steel/stainless  steel  thickness  that  can  be penetrated under the current power as an example. The perforation parameters can be adjusted in a wide range, and the duty cycle and frequency can be adjusted according to the actual effect to achieve the best effect. The piercings are sorted step by step, the high position is perforated for the first level, and so on.