Kyke: 0 Skrywer: Werfredakteur Publiseertyd: 2025-10-22 Oorsprong: Werf
| RFL-4000S(50u) | Snykop optiese verhouding | 150Kolimasie 100 / Brandpuntsafstand 150 | ||||||
| Materiaal | Dikte [mm] | Spoed [m/min] | Krag [W] | Gas | Lugdruk [bar] | Spuitstuk [mm] | Brandpuntposisie [mm] | Snyhoogte [mm] |
| Koolstofstaal | 1 | 36-50 | 4000 | N₂/lug | 12 | 1.5S | 0.5 | |
| 2 | 18-22 | 4000 | 12 | 1.5S | -1.5 | |||
| 3 | 8-12 | 4000 | 12 | 2.0S | -2 | |||
| Koolstofstaal | 3 | 4-4,5 | 2400 | O₂ | 0.5 | 1.0D | +3,5 | |
| 4 | 3-3,5 | 2400 | 0.5 | 1.0D | +4,5 | |||
| 5 | 2,9-3,2 | 2400 | 0.5 | 1.0D | +4,5 | |||
| 6 | 2,7-2,8 | 3000 | 0.6 | 1.0D | +5 | |||
| 8 | 2,4-2,5 | 3000 | 0.6 | 1.2D | +5,5 | |||
| 10 | 1,9-2,1 | 4000 | 0.65 | 1.2D | +6 | |||
| 12 | 1,2-1,5 | 4000 | 0.65 | 3.0D | +4 | |||
| 14 | 0,9-1 | 2200-2600 | 0.6 | 4.0D | +4 | |||
| 16 | 0,7-0,9 | 2200-2600 | 0.6 | 4.0D | +4,5 | |||
| 18 | 0,6-0,7 | 2200-2600 | 0.6 | 4.5D | +5 | |||
| 20 | 0,55-0,65 | 2200-2800 | 0.6 | 5.0D | +5 | |||
| 22 | 0,5-0,6 | 2200-2800 | 0.6 | 5.0D | +5 | |||
| 25 | 0,4-0,5 | 2400-3000 | 0.6 | 5.0D | +5 | |||
| Vlekvrye staal | 1 | 42-55 | 4000 | N₂ | 12 | 1.5S | 0.5 | |
| 2 | 21-28 | 12 | 2.0S | -1.5 | ||||
| 3 | 9-12 | 12 | 2.0S | -2 | ||||
| 4 | 6,5-8 | 14 | 3.0S | -3 | ||||
| 5 | 5-5,5 | 16 | 3.0S | -3.5 | ||||
| 6 | 3,3-4 | 14 | 3.5S | -4.5 | ||||
| 8 | 1,5-2 | 18 | 3.5S | -5 | ||||
| 10 | 1,2-1,5 | 18 | 5.0S | -8 | ||||
| 12 | 0.8 | 18 | 5.0S | -8.5 | ||||
| Aluminium | 1 | 35-40 | 4000 | N₂ | 12 | 1.5S | 0 | |
| 2 | 18-22 | 12 | 2.0S | 0 | ||||
| 3 | 8-10 | 14 | 2.0S | -1 | ||||
| 4 | 6-7 | 14 | 2.5S | -2 | ||||
| 5 | 4-5 | 16 | 3.0S | -3 | ||||
| 6 | 2,5-3 | 16 | 3.0S | -3.5 | ||||
| 8 | 1-1.2 | 16 | 3.5S | -4 | ||||
| 10 | 0.8 | 16 | 5.0S | -5 | ||||
| Geelkoper | 1 | 30-35 | 4000 | N₂ | 12 | 1.5S | 0 | |
| 2 | 15-18 | 12 | 2.0S | 0 | ||||
| 3 | 7,5-9 | 14 | 2.5S | -1 | ||||
| 4 | 5-6 | 14 | 3.0S | -2 | ||||
| 5 | 3-4 | 16 | 3.0S | -2.5 | ||||
| 6 | 2-2,5 | 16 | 3.0S | -3 | ||||
| 8 | 0,8-1 | 16 | 3.5S | -3.5 | ||||
Let wel: Die parameters wat in rooi in die tabel gemerk is, is prototipe parameters. Hierdie parameters word grootliks beïnvloed deur verskeie faktore tydens werklike verwerking, so hulle is slegs geskik vir klein-batch produksie en nie aanbeveel vir groot-batch produksie en verwerking. Dit is raadsaam om 'n laser met hoër krag te gebruik.
