1.Automatic cutting: delay, preheating, perforation, radius compensation, breakpoint recovery, continuous retreat 2.Efficient cutting: the output is 6-8 times higher than manual cutting, and 4-6 times higher than semi-automatic trolley cutting
3.High-quality cutting:The positioning accuracy and repeatability of the whole machine reach the JB/T5102-1999 standard, The cutting quality reaches the standards of JB/T10045.3-1999 and JB/T10045.4-1999
Specification
| Model | MS-2430HDX |
| Power supply | 220V±10%, 50Hz±10Hz |
| Power | 0.5KW |
| Oxygen purity | 99.50% |
| Preheating oxygen pressure | 0.7~0.8Mpa |
| Cutting oxygen pressure | 1 Mpa |
| Acetylene or gas pressure | 0.04~0.06 Mpa |
| Ambient temperature | -20℃~45℃ |
| Relative humidity | 90% non-condensing |
| Environment | No major shock and vibration within 5 meters of the surrounding environment |
| Effective cutting width (mm) | Machine width - 400mm |
| Effective cutting length (mm) | Machine length - 210mm |
| Flame cutting thickness (mm) | Carbon steel: edge cutting 5-100; perforation cutting ≤100 |
| Cutting torch lifting stroke (mm) | ≥100 |
| Cutting speed (mm/min) | 50-3500 |
| Setting speed error (%) | -5～+5 |
| Automatically adjust high precision (mm) | ≤0.5 |
| Linear accuracy (mm) | ≤0.5/2.5 |
| Machine marking accuracy | ≤0.5mm |
Product overview
